If you have a fire or water emergency, please call us now at (509) 487-4700

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration
Additional Phone: (509) 276-2548

Wood-Burning Stove and Fireplace Safety in Spokane and Eastern Washington

12/14/2016 (Permalink)

Not much compares to the warm pleasure of gathering around your fireplace or wood-burning stove on a cold winter’s night. Enjoy the warmth, but do be safe. Here are a few wood-burning stove and fireplace safety tips:

1. Have a professional annual inspection

If you’re planning to burn wood, make sure your stove (or fireplace) and chimney have been thoroughly checked by a professional chimney sweep. Stoves, fireplaces, and chimneys should be cleaned at least once a year. Wood-burning stoves should be inspected annually for ash and creosote buildup, cracks, and animal or bird nests.

Concerned About Your Wood Stove or Fireplace? Call Us Today – (509) 487-4700

2. Check your smoke and carbon monoxide detectors

Make sure you have enough smoke and carbon monoxide detectors. Are they in good working order? Important in all homes, these detectors are especially essential in homes with wood-burning stoves.

3. Check your wood-burning stove’s ventilation

Venting the stove is the most important part of the wood-burning system. According to Nationwide Insurance, 90% of all stove-related fires originate within the venting system. A venting system is not a chimney – it consists of lengths of 24-gauge or heavier stovepipe which connects the stove to an approved chimney.

4. Consider a moisture meter

If you stack wood outside in the weather, the Environmental Protection Agency advises you to consider purchasing a moisture meter. You can use one to make sure your timber is dry and safe to burn. Meters can be purchased online for a little as $20. Hardwoods—such as maple, beech, ash, hickory, or oak—are the best fuel for a wood-burning stove. Your wood should be cut, split, and air dried for at least a year before burning.

5. Keep flammables away

Keep furniture, drapes, rugs, and anything flammable away from your fireplace or wood-burning stove. Sometimes people move furniture closer to the fireplace or stove during warmer months. If you do that, move the furniture and any home decorations back a safe distance before lighting up your fireplace or stove.

6. Always have the right flooring

Never have carpet installed directly in front of your fireplace or wood-burning stove. A spark could land on it and start a fire. Good flooring to have near your fireplace or stove is linoleum or brick. You want a floor that’s not as combustible as carpeting.

7. Keep your insurance company informed

Tell your insurer you have installed a fireplace or a wood-burning stove. If a spark from the fireplace or the wood stove pops out and burns your couch and a large portion of a neighboring wall, you could be stuck paying the entire bill if the insurance company doesn’t know about that particular heat source. 

8. Inspect the dampers

If your wood-burning stove has an automatic draft regulator controlled by a thermostat, carefully follow the manufacturer's installation instructions. A manually operated damper can be installed on the pipe near the stove. This damper should not obstruct more than 80 percent of the pipe area. A second damper higher up on the vertical section of the stovepipe is advisable to permit shutting down the stove in case of a chimney fire.
9. If you’re buying a wood stove, buy quality.

Be sure any stove you buy is made of sturdy, suitable material, such as cast iron or steel.  Look for the Underwriters Laboratories (UL) label. If you purchase a used stove, check it carefully for cracks or other defects. The legs, hinges, grates, and draft louvers should also be checked carefully.

10. Never do these six things

Be careful with how you install, monitor, and maintain a fireplace or wood-burning stove. Five things you should never do are:
1.    Connect your wood stove to a fireplace chimney unless the fireplace has been sealed off
2.    Connect your wood stove to a chimney serving another appliance burning other fuels.
3.    Start a wood stove fire with flammable fluids, such as gasoline
4.    Extend the stovepipe through a wall or ceiling (unless there’s no alternative)
5.    Burn trash in a wood-burning stove. That may start a chimney fire.
6.    Let a wood fire burn unattended or overnight

SERVPRO of Northwest Spokane is here to help anytime, 24/7. At SERVPRO, we are trained in many restoration services & know the safest, most advanced, and quickest ways to help you recover from damage to your home or business.  

SERVPRO of Northwest Spokane
IICRC Certified Technicians

Call (509) 487-4700
24 Hour Emergency Service

Other News

View Recent Posts